| General |
| Frequency Coverage
(unit: MHz) |
| Version |
IC-U82 |
| This Model |
Tx 400 - 479 MHz
Rx 400 - 479 MHz |
| |
|
| |
| Mode |
F3E, F2D, F7W* *Optional UT-118 Required |
| Number of memory Ch. |
207 (incl. 6 scan edges and 1 call) |
| Operating Temp. Range |
-10°C to +60°C; +14°F to +140°F |
| Frequency stability |
±2.5 ppm (-10°C to 60°C) |
| Power supply requirement |
7.2V DC
(6.0-10.3V DC aceptable; Icom's battery pack only) |
| Current drain
(at 7.2V DC) |
| |
IC-V82 |
IC-U82 |
| Tx |
High (7W/5W) |
2.6A |
2.0A |
| Rx |
Max. audio Standby Power Save |
250mA
80mA
30mA |
250mA
80mA
30mA | |
| Antenna impedance |
50Ω (BNC) |
| Dimensions (W×H×D) (Projections not included) |
54 × 139 × 37.5 mm;
21/8 × 515/32 × 17/16 in |
| Weight (approx.) |
390g; 13.8oz (w/ant. and BP-222N) |
| Transmitter |
| Output power (at 7.2V DC)
IC-U82 |
5.0/2.0/0.5W (High/mid/low) |
| Spurious emissions |
Less than -60dBc |
| Max. freq. deviation |
±5.0/±2.5kHz (Wide/narrow) |
| External Microphone connector |
3-conductor 2.5(d)mm (1/10") / 2.2kΩ |
| Receiver |
| Receive system |
Double conversion superheterodyne |
| Intermediate freq. |
46.35MHz/450kHz (1st/2nd) |
| Sensitivity (typical) |
0.16µV (typ.; at 12dB SINAD) |
| Squelch sensitivity |
0.11µV (typ.; threshold) |
| Selectivity |
More than 55/50dB (wide/narrow) |
| Intermodulation |
65dB (typ.) |
| Spurious and image rejection |
80dB (typ.; VHF)
70dB (typ.; UHF) |
| Audio output power |
300mW with an 8Ω load |
| Ext. speaker connector |
3-connector 3.5(d) mm (1/8”) / 8Ω |
| Ext. Data connector |
3-connector 2.5(d) mm (1/10”) |
All stated specifications are subject to change without notice or obligation.

- 1x IC-U2 UHF 400-479Mhz Handheld radio
- 1x Battery pack
- 1x BC-146 Desktop Charger
- 1x AC adapter
- 1x Antenna
- 1x Belt Cilp
- 1x ENG Manual
| | |