|
| |
| Item ID: 20x4lcd |
| Item Name: IIC/I2C/TWI/SPI Serial Interface2004 20X4 Character LCD Mo |
|
Member Price: USD 8.80 * Shipping Cost Included
|
| Currency: USD |
| Ships to: Worldwide |
|
|
| |
Description |
| |
Description
https://bitbucket.org/fmalpartida/new-liquidcrystal/downloads
but with a little change in the init lines:
LiquidCrystal_I2C lcd(0x20, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE); // Addr, En, Rw, Rs, d4, d5, d6, d7, backlighpin, polarity
This is IIC Serial 20X4 LCD module . With this I2C interface LCD module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.
Package Included:
- 1 x Motor Drive Shield Expansion Board L293D For Arduino Duemilanove Mega2560 UNO
Download material
See detail
Interface: I2C
I2C Address: 0x27(it can't be changed )
Sofware version :0022
SDA (DATA) -> analog input pin 4
SCL (CLOCK) -> analog input pin 5
Pin Definition : GND、VCC、SDA、SCL
Back lit (Blue with black char color)
Supply voltage: 5V
Pcb Size : 60mm×99mm
Contrast Adjust : Potentiometer
Backlight Adjust : Jumper
2004 LiquidCrystal_I2C
Arduino Test Code：
#include
#include
LiquidCrystal_I2C lcd(0x27,16,2); //set the LCD address to 0x27 for a 16 chars and 2 line display
void setup()
{
lcd.init();
lcd.backlight();
lcd.setCursor(0, 0);
lcd.print("b2cqshop");
lcd.setCursor(0, 1);
lcd.print("Voltage: ");
lcd.setCursor(13, 1);
lcd.print("V");
}
void loop()
{
int val;
float temp;
val=analogRead(0);
temp=val/4.092;
val=(int)temp;//
lcd.setCursor(9, 1);
lcd.print(0x30+val/100,BYTE);
lcd.print(0x30+(val%100)/10,BYTE);
lcd.print('.');
lcd.print(0x30+val%10,BYTE);
delay(100);
}
|
|
|
| |
Shipping & Payment Details |
| |
|
|
|
